ДСТУ EN 10025-1:2007
Завантажити документ
Формат .docx · доступно зареєстрованим користувачам
1 2 4 1 2 2,1 2.2 2.3 З? 4 4.1 4.1.1 4.1.2 4.2 5 5.1 5.2 6 6.1 6.2 6.3 7 7.1 7.2 7.3 7.3.1 7.3.2 7.3.3 7.4 7.4.1 7.4.2 7.4.3 7.4.4 7.5 7.6 7.7 8 8.1 8.2 8.3 8.3.1 8.3.2 8.3.3 8.4 9 9.1 9.2 9.2.1 9.2.2 9.2.3 9.3 10 10.1 10.2 10.2.1 10.2.2 10.3 10.4 11 12 13 14 —? —? —? —?
Part 1. General technical delivery conditions
1 1.1 —? —? —? —? —? 1.2 2 2.1 EN 10020:2000 Definition and classification of grades of steel
EN 10021:1993 General technical delivery requirements for steel and iron products
EN 10025-2:2004 Hot rolled products of structural steels — Part 2: Technical delivery conditions for non-alloy structural steels
EN 10025-3:2004 Hot rolled products of structural steels — Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
EN 10025-4:2004 Hot rolled products of structural steels — Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
EN 10025-5:2004 Hot rolled products of structural steels — Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
EN 10025-6:2004 Hot rolled products of structural steels — Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
EN 10027-1 Designation systems for steels — Part 1: Steel names, principal symbols
EN 10027-2 Designation systems for steels — Part 2: Numerical system
EN 10052:1993 Vocabulary of heat treatment terms for ferrous products
EN 10079:1992 Definitions of steel products
EN 10164 Steel products with improved deformation properties perpendicular to the surface of the product — Technical delivery conditions
EN 10168 Steel products — Inspection documents — List of information and desctription
EN 10204 Metallic products — Types of inspection documents
CR 10260 Designation systems for steel — Additional symbols
EN ISO 9001 Quality management systems— Requirements (ISO 9001:2000).
2.2 EN 10017 Steel rod for drawing and/or cold rolling — Dimensions and tolerances
EN 10024 Hot rolled taper flange I sections — Tolerances on shape and dimensions
EN 10029 Hot rolled steel plates 3 mm thick or above — Tolerances on dimensions, shape and mass
EN 10034 Structural steel I and H sections —Tolerances on shape and dimensions
EN 10048 Hot rolled narrow steel strip — Tolerances on dimensions and shape
EN 10051 Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels — Tolerances on dimensions and shape
EN 10055 Hot-rolled steel equal flange tees with radiused root and toes — Dimensions and tolerances on shape and dimensions
EN 10056-1 Structural steel equal and unequal leg angles — Part 1: Dimensions
EN 10056-2 Structural steel equal and unequal leg angles — Part 2: Tolerances on shape and dimensions
EN 10058 Hot rolled flat steel bars for general purposes — Dimensions and tolerances on shape and dimensions
EN 10059 Hot rolled square steel bars for general purposes — Dimensions and tolerances on shape and dimensions
EN 10060 Hot rolled round steel bars for general purposes — Dimensions and tolerances on shape and dimensions
EN 10061 Hot rolled hexagon steel bars for general purposes — Dimensions and tolerances on shape and dimensions
EN 10067 Hot rolled bulb flats — Dimensions and tolerances on shape, dimensions and mass
EN 10162 Cold rolled steel sections — Technical delivery conditions — Dimensional and cross- sectional tolerances
EN 10279 Hot rolled steel channels — Tolerances on shape, dimensions and mass.
2.3 EN 10002-1:2001 Metallic materials — Tensile testing — Part 1: Method of test at ambient temperature
EN 10045-1 Metallic materials — Charpy impact test — Part 1: Test method
EN 10160 Ultrasonic testing of steel flat product of thickness equal to or greater than 6 mm (reflection method)
EN 10306 Iron and steel — Ultrasonic testing of H beams with parallel flanges and IPE beams
EN 10308 Non destructive testing — Ultrasonic testing of steel bars
CR 10261 ECISS Information Circular 11 — Iron and steel — Review of available methods of chemical analysis
EN ISO 377 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997)
EN ISO 643 Steels — Micrographic determination of the apparent grain size (ISO 643:2003)
EN ISO 2566-1 Steel — Conversion of elongation values — Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
EN ISO 14284 Steel and iron — Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
EN ISO 17642-1 Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 1: General (ISO 17642-1:2004)
EN ISO 17642-2 Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests (ISO 17642-2:2004)
EN ISO 17642-3 Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 3: Externally loaded tests (ISO 17642-3:2004).
2.1 EN 10020:2000 EN 10021:1993 EN 10025-2:2004 EN 10025-3:2004 EN 10025-4:2004 EN 10025-5:2004 EN 10025-6:2004 EN 10027-1 EN 10027-2 EN 10052:1993 EN 10079:1992 EN 10164 EN 10168 EN 10204 CR 10260 EN ISO 9001 2.2 EN 10017 EN 10024 EN 10029 EN 10034 EN 10048 EN 10051 EN 10055 EN 10056-1 EN 10056-2 EN 10058 EN 10059
EN 10060 EN 10061 EN 10067 EN 10162 EN 10279 2.3 EN 10002-1:2001 EN 10045-1 EN 10160 EN 10306 EN 10308 CR 10261 EN ISO 377 EN ISO 643 EN ISO 2566-1 EN ISO 14284 EN ISO 17642-1 EN ISO 17642-2 EN ISO 17642-3 З? —? EN 10020:2000 —? EN 10021:1993 —? EN 10052:1993 —? EN 10079:1992 4 4.1 4.1.1 4.1.2 4.2 5 5.1 а?) Ь?) с?) d) е?) f) 5.2 6 6.1 6.2 6.3 7 7.1 7.2 7.2.1 7.2.2 7.2.3 CEV = 7.3 7.3.1 7.3.1.1 7.3.1.2 7.3.1.3 7.3.2 7.3.2.1 7.3.2.2 7.3.3 7.4 7.4.1 7.4.2 7.4.3 7.4.4 7.5 7.6 7.7 7.7.1 7.7.2 8 8.1 8.2 8.2.1 8.2.2 8.3 8.3.1 8.3.2 8.3.3 8.3.3.1 8.3.3.2 8.4 9 9.1 9.2 9.2.1 9.2.2 9.2.2.1 —? —? 9.2.2.2 9.2.3 9.2.3.1 9.2.3.2 9.2.3.3 а?) Ь?) 9.3 10 10.1 10.2 10.2.1 10.2.2 —? —? —? 10.3 —? —? —? 10.4 11 11.1 —? —? —? —? 11.2 11.3 12 13 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 14 —? —? —?
а? | Ь? )
а?) Ь?) —? —?
а?) ь?) с?) d) В?.1 —? —? В?.2 В?.2.1 —? —? а?) Ь?) с?) —? —? —? —? —? —? —? В?.2.2 В?.2.3 В?.2.3.1 В?.2.3.2 В?.2.3.3 В?.2.3.4 В?.2.3.5 В?.2.4 В?.З? Ь?] с?) В?.4 В?.4.1 В?.4.2 В?,4.з? В?.4.4 а?) Ь?) с?) В?.4.5
SS 21 27 51
NS 1908 54
NJ
ZA.1 http://europa.eu.int/comm/enterpnse/construction/internal/dangsub/dangmain.htm ).
ZA.2.2 —? —? —? —? —? —? —? —? —? —? 2 —? —? —? —? —? —? —? —? —?
1 EN 1011-2 Welding — Recommendations for welding of metallic materials — Part 2: Arc welding of ferritic steels ( 2 EN 1993 Eurocode 3: Design of steel structures (Eurocode 3: 3 EN 10163-1 Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections — Part 1: General requirements ( 4 EN 10163-2 Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections — Part 2: Plates and wide flats ( 5 EN 10163-3 Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections — Part 3: Sections ( 6 EN 10149-1 Hot-rolled flat products made of high yield strength steels for cold forming — Part 1: General delivery conditions ( 7 EN 10149-2 Hot-rolled flat products made of high yield strength steels for cold forming — Part 2: Delivery conditions for thermomechanically rolled steels ( 8 EN 10149-3 Hot-rolled flat products made of high yield strength steels for cold forming — Part 3: Delivery conditions for normalized or normalized rolled steels ( 9 EN 10210-1 Hot finished structural hollow sections of non-alloy and fine grain structural steels — Part 1: Technical delivery requirements ( 10 EN 10219-1 Cold formed welded structural hollow sections of non-alloy and fine grain structural steels — Part 1: Technical delivery requirements ( 11 EN 10221 Surface quality classes for hot-rolled bars and rods -Technical delivery conditions ( 12 EN 10225 Weldable structural steels for fixed offshore structures — Technical delivery conditions ( 13 EN 10248-1 Hot rolled sheet piling non alloy steels — Part 1: Technical delivery conditions ( 14 EN 10249-1 Cold formed sheet piling non alloy steels — Part 1: Technical delivery conditions ( 15 EN 10250-2 Open die steel forgings for general engineering purposes — Part 2: Non-alloy quality and special steels ( 16 EN 10268 Cold rolled flat products made of high yield strength micro-alloyed steels for cold forming — General delivery conditions ( 17 EN 10277-2 Bright steel products — Technical delivery conditions — Part 2: Steels for general engineering purposes ( 18 prEN 10293 Steel castings for general engineering uses ( 19 EN 10297-1 Seamless circular steel tubes for mechanical and general engineering purposes — Technical delivery conditions — Part 1: Non-alloy and alloy steel tubes ( 20 ECSC