Прокат листовий і штаба без покриву, отримані безперервним гарячим прокатуванням, з нелегованої та легованої сталі. Допуски на розміри й форму

1 2 4

У? —? —? —?

CONTINUOUSLY HOT-ROLLEDUNCOATED PLATE, SHEET AND STRIPOF NON-ALLOY AND ALLOY STEELS Tolerances on dimensions and shape
1 2

EN 10020 Definition and classification of grades of steel
EN 10025 Hot-rolled products of non-alloy structural steels; technical delivery conditions
EN 10028-2 Flat products made of steels for pressure purposes — Part 2: Non-alloy and alloy steels with specified elevated temperature properties
EN 10028-3 Flat products made of steels for pressure purposes — Part 3: Weldable fine grain steels, normalized
EN 10028-4 Flat products made of steels for pressure purposes — Part 4: Nickel alloy steels with specified low temperature properties
EN 10028-5 Flat products made of steels for pressure purposes — Part 5: Weldable fine grain steels, thermomechanically rolled
EN 10028-6 Flat products made of steels for pressure purposes — Part 6: Weldable fine grain steels, quenched and tempered
EN 10048 Hot-rolled narrow steel strip — Tolerances on dimensions and shape
EN 10079 Definitions of steel products
EN 10083-1 Quenched and tempered steels — Part 1: Technical delivery conditions for special steels
EN 10083-2 Quenched and tempered steels — Part 2: Technical delivery conditions for unalloyed quality steels
EN 10083-3 Quenched and tempered steels — Part 3: Technical delivery conditions for boron steels
EN 10088-2 Stainless steels — Part 2: Technical delivery conditions for sheet/plate and strip for general purposes
EN 10111 Continuously hot-rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions
EN 10113-2 Hot-rolled products in weldable fine grain structural steels — Part 2: Delivery conditions for normalized/normalized rolled steels
EN 10113-3 Hot-rolled products in weldable fine grain structural steels — Part 3: delivery conditions for thermomechanically rolled steels
EN 10120 Steel sheet and strip for welded gas cylinders
EN 10137-2 Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions — Part 2: Delivery conditions for quenched and tempered steels
EN 10137-3 Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions — Part 3: Delivery conditions for precipitation hardened steels
EN 10149-2 Hot-rolled flat products made of high yield strength steels for cold forming — Part 2: Delivery conditions for thermomechanically rolled steels
EN 10149-3 Hot-rolled flat products made of high yield strength steels for cold forming — Part 3: Delivery conditions for normalized or normalized rolled steels
EN 10155 Structural steels with improved atmospheric corrosion resistance — Technical delivery conditions
EN 10207 Steels for simple pressure vessels — Technical delivery requirements for plates, strips and bars .
EN 10208-2 Steel pipes for pipelines for combustible fluids — Technical delivery conditions — Part 2: Pipes of requirement class prEN 10028-7

EN 10020 EN 10025 EN 10028-2 EN 10028-3 EN 10028-4 EN 10028-5 EN 10028-6 EN 10048 EN 10083-1 EN 10083-2 EN 10083-3 EN 10088-2 EN 10111 EN 10113-2 EN 10113-3 EN 10120 EN 10137-2 EN 10137-3 EN 10149-2 EN 10149-3 EN 10155 EN 10207 EN 10207 EN 10208-2

prEN 10028-7 prEN 10084 1) EURONORM 96 (1979) У? —? —? 4 4.1 а?) Ь?) с?) d) е?) f) h) і?) 4.2 5 а?) Ь?) 6 6.1 6.2 6.3 7 7.1 7.1.1 7.1.2 7.1.3 В? —? —? —? < 1 500 > 1 500
< 1 800 > 1 800 < 2,00 < 1 500 > 1 500
< 1 800 > 1 800 < 2,00 S420; S460 EN 10208-2 L480; L550 EN 10208-2 S355 EN 10025 S420; S460 EN 10113-2;-3 S500; S550; EN 10149-2 S355 EN 10155 EN 10028-2 EN 10137-2 S500; S550;
S620; S690;
S890; S960;

EN 10028-6 EN 10083-1 1CS60

1CS67 EU 132-79

EU 132-79 EN 10083-3

EN 10083-1
EN 10083-1
EN 10083-1
EN 10083-1
EU 86-70
EU 86-70 prEN 10084
EN 10028-2
EN 10028-2 18CrNiMo7-6 prEN 10084 EU 85-70
EU 85-70
EU 85-70
EU 89-70
EU 89-71
EU 132-79
EU 132-79 7.2 7.3 > 1 200 < 1 500
> 1 500 + 20
+ 25 + 5
+ 6 1) 7.4 7.4.1 7.4.2 7.5 7.6 7.7 8 8.1 90 ( 8.2 8.2.1 8.2.2 8.2.3 8.3 8.4 < 1 500 > 1 500
< 2 200 >0,8 <2,0 0,20 0,24 0,28 > 2,0 < 3,0 0,22 0,27 0,33 > 3,0 < 4,0 0,28 0,32 0,40 > 4,0 < 8,0 0,28 0,32 0,40
8.5 9 9.1 9.1.1 9.1.2 9.1.3 9.2 9.3 9.4 9.5

9.6 10 1) 2) 3) 4) 5) 6) 7) St 70-2) (DIN 17100) (A 50-2; A 60-2;
A 70-2) (NF A 35-501) S355 EN 10025 (St 52-3) (DIN 17100) (E 36-3; E36-4) (NFA36-101) S355 EN 10155 (WTSt 52) (SEW 087) (E 36 W) (NF A 35-502) S355 EN 10149-2;-3 (QStE 340) (SEW 092) (E 335D) (NF A 36-231) S355 EN 10113-2;-3 (StE 355;
BStE 355) (DIN 17102;

SEW 083) (E 355) (NF A 36-201) (15CD4.05) (NF A 36-206)

(NF A 36-206) 10 (NF A 36-206) Fe 690) (UNI 7070-82) EN 10025 (50 FeE 355) (UNI EU 28-88)
UNI 8787-85) UNI 8787-85) — — —— — — UNI 7874-79) 16 UNI 7845-78) — — — — — — — —— — — 45 UNI 8788-85 — — — 20 UNI 8788-85 13 (UNI 6901) S420; S460
S420; S460
P460
S460 EN 10208-2
EN 10113-2;-3
EN 10149-2;-3
EN 10028-3,-6
EN 10137-2 StE360.7;StE385.7; StE415.7;StE445,7 (StE380; StE420;
StE460; StE500) (BstE420;BStE460;
BstE500; BStE550) (QStE380;QStE420;
QStE460) DIN 17172
(DIN 17102)
(SEW 083)

(SEW 092) (E 420; E 460)

(E 460 T) (NF A 36-201)

(NF A 36-204)
(NF FeE460) (UNI 8890-87) UNI 8787-85) 1CS55 EU 132-79 070 UNI 8787-85) 1CS60 EU 132-79 080 UNI 8787-85) 34 UNI 8787-85) 41 UNI 8787-85) 17 UNI 8788-85 18CrNiMo7-6 prEN 10084 820 UNI 8788-85 (UNI 8317)
S600; S650
S700 EN 10149-2 (QStE500;
QStE550) (SEW 092) — — S500; S550
S620; S690

S890; S960 EN 10137-2 — — (E 500T; E 550T;

E 620T; E 690T) (NF A 36-204) NF A 35-533 2 CS 100 EU 132-79 NF A 35-553 NF A 35-553 (NF A 36-209) S600; S650
S700 EN 10149-2 — — (Fe FeE 560) (UNI 8890-84) S500; S550
S620; S690
S890; S960 EN 10137-2 (Fe FeE 550;
FeE 620;
FeE 690) (UNI EU 137-89)
Fe E550;
Fe E620
Fe E690 UNI EU 137-89 UN (UNI 7500)

(UNI 8317) EURONORM 96