ДСТУ EN 10149-1:2009
Завантажити документ
Формат .docx · доступно зареєстрованим користувачам
1 2 4 1 2 2.1 2.2 2.3 З? 4 4.1 4.2 5 5.1 5.2 6 6.1 6.2 7 7.1 7.2 7.3 7.4 7.5 7.6 7.7 8 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 9 10 11 У? —? —? —? —?
Part 1: General delivery conditions
1 1.1 1.2 —? —? —? —? —? —? —? 2 2.1 EN 10020 Definition and classification of grades of steel
EN 10021 General technical delivery requirements for steel and iron products
EN 10027-1 Designation systems for steel — Part 1: Steel names principal symbols
EN 10027-2 Designation systems for steel — Part 2: Numerical system
EN 10052 Vocabulary of heat treatment terms for ferrous products
EN 10079 Definition of steel products
EN 10163-1 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections — Part 1: General requirements
EN 10163-2 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections — Part 2: Plates and wide flats
EN 10164 Steel products with improved deformation properties perpendicular to the surface of the product —Technical delivery conditions
EN 10204 Metallic products —Types of inspection documents
EURONORM 162 (1981 ) 1) Cold — rolled sections — Technical conditions of delivery
EURONORM 168 (1986) 1) Iron and steel products — Inspection documents — Contents
ECSC IC 2 (1983) 1) Weldable fine — grained structural steels — Recommendations for processing, in particular for welding
ECSC IC 10 Designation systems for steel —Additional symbols for steel names.
2.2 EN 10029 Hot-rolled plates 3 mm thick or above —Tolerances on dimensions, shape and mass
EN 10048 Hot-rolled narrow steel strip —Tolerances on dimensions and shape
EN 10051 Continuously hot-rolled non-coated sheet and strip of non — alloy and alloy steels — Tolerances on dimensions and shape
EURONORM 91 (1981) 1) Hot-rolled wide flats — Tolerances on dimensions, shape and mass.
2.3 EN 10002-1 Metallic materials — Tensile testing — Part 1: Method of test (at ambient temperature)
EN 10045-1 Metallic materials — Charpy impact test — Part 1: Test method
EURONORM 6 (1955) 1) Bend test on steel
EURONORM 12 (1955) 1) Bend test on steel sheet and strip with a thickness less than 3 mm
EURONORM 18 (1979) 1) Selection and preparation of samples and test pieces for steel and iron and steel products
EURONORM 103 (1971 ) 1) Microscopic determination of the ferritic and austenitic grain size of steel
EURONORM 160 (1985) 1) Manual ultrasonic testing of plate in thickness > 6 mm (reflection method)
ISO 2566-1 (1984) Steel — Conversion of elongation values — Part 1: Cardon and low alloy steels.
EN 10027-1 EN 10027-2 EN 10052:1993 EN 10079:1992 EN 10163-1 EN 10163-2 EN 10164 EN 10204 EURONORM 162 (1981) EURONORM 168 (1986) ECSC ECSC 2.2 EN 10029 EN 10048 EN 10051 EURONORM 91 (1981) 2.3 EN 10002-1 EN 10045-1 EURONORM 6 (1955) EURONORM 12 (1955) EURONORM 18 (1979) EURONORM 103 (1971) EURONORM 160 (1985) ISO 2566-1 (1984) 3.1 3.2 3.3 3.4
3.5 3.6 4 4.1 а?) Ь?) с?) d) е?) 4.2 5 5.1 5.2 6 6.1 6.1.1 6.1.2 6.2 6.2.1 6.2.2 —? —? —? —? 7 7.1 7.1.1 7.1.2 7.2 7.2.1 7.2.2 7.2.3 7.3 7.3.1 7.3.2 7.3.3 7.3.4 7.4 7.4.1 7.4.1.1 7.4.1.2 7.4.2 7.4.2.1 7.4.2.2 7.5 7.5.1 7.5.1 —? —? —? 7.5.2 7.5.2.1 7.5.2.1.1 7.5.2.1.2 7.5.3 7.6 7.6.1 7.6.2 EN 10163, 7.7 8 8.1 8.1.1 8.1.2 8.1.3 2! 8.1.4 8.2 8.3 40 8.4 8.4.1 8.4.2 8.5 8.5.1 8.5.1.1 8.5.1.2 8.5.1.3 8.5.2 8.5.2.1 8.5.2.2 8.5.2.3 а?) Ь?) 8.5.2.4 8.6 8.6.1 8.6.2 8.6.2.1 8.6.2.2 —? —? —? 8.6.2.3 8.6.3 8.7 8.8 9 9.1 —? —? —? —? 9.2 9.3 9.4 10 11 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11)
NS 10 006 91 DIN 59200 NF A 46 012 UNI-EU 91 NBN A 43-301 SS 21 21 50 M 3231 103 DIN 50601 NF A 04102 BS 4490 UNE 7-280 NBN A 14-101 NP-1787 160 NF A 04 305 BS 5996 UNI-EU 160 SS 11 42 03 162 DIN 17118
DIN 59413 NF A 37101 BS 2994 UNE 36-570 UNI 7344 NBN A 02-002 M 3316 168 NF A 03116 UNE 36-800 UNI-EU 168 SS 11 00 12 ECSC