Стаціонарні системи пожежогасіння. Системи пінного пожежогасіння. Частина 1. Вимоги до компонентів та методи їх випробування

1 2 4 1 2 З? 4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 5 5.1 5.2 6 6.1 6.2 7 8 8.1 8.2 8.3 8.4 8.5 8.6 9 9.1 9.2 10 10.1 10.2 10.3 11 12 12.1 12.2 12.3 В?.1 В?.2 В?.З? Е?.1 Е?.2 Е?.З? F.1 F.2 F.3 F.4 J.1 J.2 J.3 —? —? —? —? —? —? —?
—?

FIXED FIREFIGHTING SYSTEMSFOAM SYSTEMS

Part 1: Requirements and test methods for components
1 2 EN 671 -1:2001 Fixed firefighting systems — Hose systems — Part 1: Hose reels with semi-rigid hose
EN 1568-1:2000 Fire extinguishing media — Foam concentrates — Part 1: Specification for medium expansion foam concentrates for surface application to water-immiscible liquids
EN 1568-2:2000 Fire extinguishing media — Foam concentrates — Part 2: Specification for high expansion foam concentrates for surface application to water-immiscible liquids
EN 1568-3:2000 Fire extinguishing media — Foam concentrates — Part 3: Specification for low expansion foam concentrates for surface application to water-immiscible liquids
EN 1568-4 Fire extinguishing media — Foam concentrates — Part 4: Specification for low expansion foam concentrates for surface application to water-miscible liquids
EN 12259-1:1999 + A1:2001 Fixed fire fighting systems — Components for sprinkler and water spray systems — Part 1: Sprinklers
EN 12416-1:2001 Fixed firefighting systems — Powder systems — Part 1: Requirements and test methods for components
EN 12542 Static welded steel cylindrical tanks, serially produced for the storage of Liquified Petroleum Gas (LPG) having a volume not greater than 13 m 3 and for installation above ground — Design and manufacture
EN 20225 Fasteners — Bolts, screws, studs and nuts — Symbols, designations and dimensions (ISO 20225:1983)
EN ISO 175 Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:1999)
EN ISO 179-1 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test (ISO 179-1:2000)
EN ISO 180 Plastics — Determination of Izod impact strength (ISO 180:2000)
EN ISO 228-1 Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
EN ISO 527-1 Plastics — Determination of tensile properties — Part 1: General principles (ISO 527-1:1993 including Corr 1:1994)
EN ISO 898-1 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs (ISO 898-1:1999)
EN ISO 4759-1 Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, EN ISO 9001:2000 Quality management systems — Requirements (ISO 9001:2000)
ISO 7-1 Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation
ISO 272 Fasteners — Hexagon products — Widths across flats
ISO 885 General purpose bolts and screws — Metric series — Radii under the head
ISO 888 Bolts screws and studs — Nominal lengths and thread length for general purpose bolts
ISO 1179-1 Connections for general use and fluid power — Ports and stud ends with EN ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports (Revision of ISO 1179:1981)
ISO 4633 Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for material
ISO 6447 Rubber seals — Joint rings used for gas supply pipes and fittings — Specification for material
ISO 6448 Rubber seals — Joint rings used for petroleum product supply pipes and fittings — Specification for material
ISO 7005-1 Metallic flanges; Part 1: Steel flanges
ISO 7005-2 Metallic flanges; Part 2: Cast iron flanges
ISO 9227 Corrosion tests in artificial atmospheres; salt spray tests
Nordtest method NT Fire 042
EN 671-1:2001

EN 1568-1:2000 EN 1568-2:2000 EN 1568-3:2000 EN 1568-4 EN 12259-1:1999 + EN 12416-1:2001 EN 12542 EN 20225 EN ISO 175 EN ISO 179-1 EN ISO 180 EN ISO 228-1 EN ISO 527-1 EN ISO 898-1 EN ISO 4759-1 EN ISO 9001:2000 ISO 7-1 ISO 272 ISO 885 ISO 888 ISO 1179-1 ISO 4633 ISO 6447 ISO 6448 ISO 7005-1 ISO 7005-2 ISO 9227

3.1 3.2 3.3 3.4 Q = 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13

3.14 3.15 3.16 3.17 3.18 3.19 3.20 3.21 3.22 3.23 4 4.1 4.1.1

4.1.2 4.1.3 а?) Ь?) 4.2 4.2.1 4.2.2 4.3 4.3.1 4.3.2 4.4 4.5 4.5.1 4.5.2 4.5.3 4.6 4.7 4.7.1 4.7.2 а?) Ь?) с?) d) 4.7.3 а?) Ь?) с?) d) 4.8 4.8.1 4.8.2 5 5.1 5.2 6 6.1 6.2 7 а?) Ь?) Nordtest Method NT Fire 042 ( 8 8.1 8.2 8.2.1 8.2.2 8.3 8.4 8.4.1 8.4.2 8.5 8.6 9 9.1 9.2 10 10.1 10.1.1 10.1.2 а?) Ь?) 10.2 10.3 11 а?) Ь?) с?) d) е?) f) 12 12.1 —? —? 12.2 12.2.1 12.2.2 12.2.3 12.2.4 12.2.5 12.2.6 12.2.7 12.2.8 12.3 12.3.1 12.3.2 В?.1 Vt 2 =V t , - Vt 2 — В?.2 В?.З? Е?.1 Е?.2
Q1 Q2 Q3
4* ■?■?-
1 1 1

F.1 F.2 F.3 F.4 J.1 J.2 J.3