Станки для заточки ленточных пил. Основные параметры. Нормы точности

'■? 'W' . t hW-

Basic parameters. Standards of accuracy
1.

2.1. 2.2.

2.4.

2.6.

2.7.

3. 3.1. 3.2. 3.3. 3.4. 3.5. 3.6.

1. 2. 1. 1.1. 1.2. 1.3. 2. 2.1. 2.2. 2.3. 2.4. 3. 3.1. 3.2. 3.3. 3.4. 3.5. 4. 4.1. 4.2. 5. 5.1. 5.2. 5.3. 6. 6.1. 6.2. 6.3. 6.4. 6.5. 6.6. 6.7. 7. 7.1. 8. 8.1. 9. ( (

( 1. Framework
1.1. Main frame
1.2. Base
1.3. Guide pulley support stand
2. Feed of workpiece and/or tools
2.1. Motor
2,j2. Feed pawl
2.3. Feed pawl pivot
2.4. Cam shaft
3. Workpiece support clamp and guide
3.1. Guide pulley
3.2. Brackets and rollers
3.3. Blade carrier
3.4. Blade guide rollers
3.5. Blade check bar
4. Tool-holders and tools
4.1. Grinding wheel spindle
4.2. Grinding wheel
5. Workhead and tool drives
5.1. Grinding head
5.2. Grinding head drive
5.3. Grinding head motor
6. Controls __
•?6.1 . Grinding heat vertical adjustment hand-wheel
"6.2. Grinding head locking lever ■?
6.3. Handwheel for vertical adjustment of the blaoe
6.4. Balance gear handwheel
6.5. Feed pawl locking lever
•6.6. Blade guide locking lever
6.7. Blade carrier locking lever
7. Safety devices (examples)
7.1. Grinding wheel guard i
8. Miscellaneous
8.1. Main drive enclosure door ;
<9. ((clause free) ( 1. 2. 3. 4. 5.
2.1

2.2 , 2.3, 2.4
2.5