ДСТУ OIML D 11:2012
Цей стандарт встановлює загальні технічні вимоги та методи випробувань для електронних засобів вимірювання. Він визначає стійкість обладнання до впливу зовнішніх чинників, таких як температура, вологість, вібрація та електромагнітні завади.
При виборі контрольно-вимірювальних приладів для моніторингу шкідливих факторів перевіряйте їхню відповідність вимогам ЕМС та стійкості до промислових умов згідно з цим ДСТУ.
Download document
.docx format · available to registered users
1 2 4 1 2 З? 4 5 5.1 5.2 5.3 5.4 5.5 6 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 7 8 8.1 8.2 8.3 8.4 8.5 9 9.1 9.2 10 10.1 10.2 10.3 10.4 10.5 10.6 11 11.1 11.2 12 12.1 12.2 12.3 12.4 12.5 13 13.1 13.2 13.3 13.4 13.5 13.6 13.7 13.8 14 14.1 14.2 В?.1 В?.2 —? —? —? —?
General technical requirements
1 1.1 1.2 1.3 1.4 —? —? 2 2.1 2.2 2.3 З? 3.1 З?В?, 3.2 3.3 3.4 3.5 3.6 3.7 3.8
3.9 3.10 а?) Ь?) с?) d) 3.11 3.12 а?) Ь?) с?) d) 3.13 3.13.1 3.13.2 3.14 3.15 3.16 3.17 3.18
3.18.1 3.18.1.1 3.18.1.2 3.18.2 3.19 3.20 3.20.1 3.20.2 3.20.3 3.20.4 3.21 3.22 3.23 —? —? 3.24 3.25 AM — ASD — DC — DIS — EMC — ECP — GSM — ISO — N.A. — OIML — RH — 4 4.1 а?) Ь?) с?) 4.2 4.3 4.4 4.5 4.6 5 5.1 5.1.1 5.1.2 а?) Ь?) 5.1.3 а?) Ь?) 5.1.4 5.2 5.2.1 а?) Ь?) 5.2.2 5.2.3 5.2.4 5.3 5.3.1 а?) Ь?) с?) 5.3.2 5.3.3 5.4 5.4.1 а?) Ь?) 5.4.2 5.4.3 5.5 5.5.1 а?) Ь?)
5.5.2 а?) Ь?) 5.5.3 6 6.1 6.1.1 а?) Ь?) с?) d) е?) f) 6.1.2 6.2 а?) Ь?) с?) —? —? —? —? —? ( d ) 6.3 а?) b) 6.4 6.5 а?) Ь?) с?) d) е?) 6.6 6.6.1 6.6.2 а?) Ь?) с?) 6.7 6.8 7 8 8.1 8.1.1 8.1.2 а?) Ь?) с?) 8.1.3 а?) Ь?) с?) d) е?) 8.2 8.2.1 8.2.2
8.2.3 8.2.4 8.2.5 8.3 8.4 а?) Ь?) с?)
*’ 8.4.1 8.4.2 8.4.3 8.4.4 8.4.5 • 8.4.6 8.4.7 8.4.8 8.4.9 8.5 а?) Ь?) с?) 8.5.1 8.5.2 З?В? , 9 ( 9.1 9.2 9.2.1 NSFd (2) 12.2 NSFd (2) 12.5 NSFd (2) 13.6 NSFa — NSFd — (1) — (2) — 9.2.2 9.2.2.1 а?) b) с?) d) е?) f) 9.2.2.2 а?) Ь?) с?) Ь?) с?) d) е?) f) h) 10 10.1 10.1.1 Ь?) с?) d) е?) f) Ь?) с?) d) е?) f) 10.2 10.2.1 Ь?) с?) d) f) h) і?)
10.2.2 а?) Ь?) с?) d) Ь?) с?) е?) f)
10.3 Ь?) с?) d) е?) 10.4 10.4.1 Ь?)
10.4.2 Ь?)
10.5 —? —? —? —? Ь?) с?) d) е?)
10.6 Ь?) с?) d) е?) f) 11 11.1 11.1.1 —? —? —? —? —?
11.1.2 11.2 Ь?) с?) d) 12 12.1 12.1.1 Ь?) с?) d) е?) ... 2) 3> 4) 5)
GSM 2)
12.1.2 2) 3) 4) 5) Ь?) с?) d) ...
12.2 2 * 3) 4) Ь?) с?) d) е?)
12.3 21 3) 1 Ь?) с?) d) е?)
12.4 2) Ь?) с?) d) е?) ...
12.5 21 3) Ь?) с?) d) е?) f) 13 13.1
13.2 2) 13.3
2) • EUTs, ■? EUTs, 13.4
11 2) 3) 4) 5) d) е?) ...
13.5 21 Ь?) с?) d)
13.6 21 3) 41 Ь?) с?) d) е?) ...
13.7 2) Ь?) с?) d) е?) f) ...
13.8 2) 3) 4) Ь?) с?) d) е?) 14 14.1 Ь?) с?) d) е?) f) h) і?) j) к?) b) с?) d) е?) 14.2 14.2.1 21 3) Ь?) с?) d) е?)
14.2.2 5.6.2: 5.6.4: —? —? —? —? 2> 3 > 4) 51 Ь?) с?) d)
( 1 International Vocabulary of Basic and General Terms in Metrology (VIM) (1993)
2 OIML 4 IEC 60068-2-1 (1990-05) With amendments 1 (1993-02) and 2 (1994-06) Environmental testing, Part 2: Tests, Test A: cold
5 IEC 60068-2-2 (1974-01) With amendments 1 (1993-02) and 2 (1994-05) Environmental testing Part 2: Tests. Test B:
6 IEC 60068-2-6 (1995-03), with Corr. (1995-03) Environmental testing — Part 2: Tests — Test Fc: Vibration (sinusoidal)
7 IEC 60068-2-11 (1981-01) Environmental testing — Part 2: Tests Ka: Salt mist With Corr. 1 (1999-12)
8 IEC 60068-2-18 (2000-10) Environmental testing — Part 2-18: Tests — Test R and guidance: Water
9 IEC 60068-2-30 (1980-01) With amendment 1 (1985-08) Environmental testing Part 2: Tests Test Db and guidance: Damp heat, cyclic (12 + 12-hour cycle)
10 IEC 60068-2-31 (1969-01) with amendment 1 (1982-01) Environmental testing Part 2: Tests Test Ec: Drop and topple, primarily for equipment-type specimens
11 IEC 60068-2-47 (1999-10) Environmental testing Part 2-47: Test. Mounting of components, equipment and other articles for vibration, impact and similar dynamic tests
12 IEC 60068-2-64 (1993-05), with Corr. 1 (1993-10) Environmental testing — Part 2: Test methods, Test Fh: Vibration, broad-band random (digital control) and guidance
13 IEC 60068-2-78 (2001-08) Environmental testing — Part 2-78: Tests — Test Cab: Damp heat, steady state (IEC 60068-2-78 replaces the following withdrawn standards: IEC 60068-2-3, test Ca and IEC 60068-2-56, test Cb)
14 IEC 60068-3-1 (1974-01) + Supplement A (1978-01) Environmental testing Part 3 Background information, Section 1: Cold and dry heat
15 IEC 60068-3-4 (2001-08) Environmental testing — Part 3-4: Supporting documentation and guidance — Damp heat tests
16 IEC 60068-3-8 (2003-08) Environmental testing — Part 3-8: Supporting documentation and guidance — Selecting amongst vibration tests
17 IEC 60512-11-8 (1995-11) Electromechanical components for electronic equipment — Basic testing procedures and measuring methods — Part 11: Climatic tests — Section 8: Test 11 h — Sand and dust
18 IEC 60512-14-7 (1997-10) Electromechanical components for electronic equipment— Basic testing procedures and measuring methods — Part 14: Sealing tests — Section 7: Test 14g: Impacting water
19 IEC 60529 (2001-02) Ed. Degrees of protection provided by Corr.1 (2003-01) Ed. Am1 (1999-11) Amendment 1 Consolidated Edition
20 IEC 60654-2 (1979-01) With amendment 1 (1992-09) Operating conditions for industrial-process measurement and control equipment. Part 2. Power
21 IEC 60721-2-5 (1991-07) Classification of environmental conditions — Part 2: Environmental conditions appearing in nature — Section 5: Dust, sand, salt mist
22 IEC 60721-3-3 (1994-12) with Amendments 1 (1995-06) and 2 (1996-11) Classification of groups of environmental parameters and their severities — Stationary use at weatherprotected locations Consolidated edition 2.2 (2002-10)
23 IEC 60721-3-4 (1995-01) With Amendment 1 (1996-11) Classification of groups of environmental parameters and their severities — Stationary use at non-weatherprotected locations
24 IEC/TR 61000-2-1 (1990-05) Electromagnetic compatibility (EMC) Part 2: Environment Section 1: Description of the environment — Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems
25 IEC 61000-2-2 (2002-03) Electromagnetic compatibility (EMC) Part 2-2: Compatibility levels for low — frequency conducted disturbances and signalling in public low-voltage power supply systems
26 27 IEC 61000-4-1 (2000-04) Basic EMC Publication Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques. Section 1: Overview of IEC 61000-4 series
28 IEC 61000-4-2 (1995-01) with amendment 1 (1998-01) and amendment 2 (2000-11) Basic EMC Publication Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques. Section 2: Electrostatic discharge immunity test. Consolidated Edition: IEC 61000-4-2 (2001-04) Ed.
29 IEC 61000-4-3 consolidated Edition 2.1 (2002-09) with amendment 1 (2002-08) Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques. Section 3' Radiated, radio-frequency, electromagnetic field immunity test
30 IEC 61000-4-4 (2004-07) Electromagnetic compatibility (EMC) Part 4-4: Testing and measurement techniques — Electrical fast transient/burst immunity test
31 IEC 61000-4-5 (2001-04) consolidated edition 1.1 (Including Amendment 1 and Correction 1) Electromagnetic compatibility (EMC) — Part 4-5: Testing and measurement techniques — Surge immunity test
32 IEC 61000-4-6 (2003-05) With amendment 1 (2004-10) Electromagnetic compatibility (EMC) Part 4-6: Testing and measurement techniques. Section 6: Immunity to conducted disturbances, induced by radio-frequency fields
33 IEC 61000-4-8 (1993-06) with amendment 1 (2000-11) Electromagnetic compatibility (EMC) — Part 4-8: Testing and measurement techniques — Power frequency magnetic field immunity test Consolidated Edition 1.1 (2001-03)
34 IEC 61000-4-11 (2004-03) Electromagnetic compatibility (EMC) — Part 4-11: Testing and measuring techniques — Voltage dips, short interruptions and voltage variations immunity tests
35 IEC 61000-4-17 (1999-06) Electromagnetic compatibility (EMC) — Part 4-17: Testing and measurement techniques — Ripple on DC input power port immunity test. Am. 1 (2001-07) Consolidated edition (2002-07) Ed.
IEC 61000-4-29 (2000-08) Electromagnetic compatibility (EMC) — Part 4-29: Testing and measuring techniques — Voltage dips, short interruptions and voltage variations on DC input power port immunity tests
37 IEC 61000-6-1 (1997-07) Electromagnetic compatibility (EMC) — Part 6: Generic standards — Section 1: Immunity for residential, commercial and light-industrial environments
38 IEC 61000-6-2 (1999-01) Electromagnetic compatibility (EMC) — Part 6-2: Generic standards — Immunity for industrial environments
39 IEC 61326 (2002-02) Electrical equipment for measurement, control and laboratory use — EMC requirements Corr. 1 (2002-07)
40 ISO 16750-2:2003 Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads
41 ISO 7637-1 (2002) Road vehicles — Electrical disturbance from conducting and coupling — Part 1 : Definitions and general considerations
42 ISO 7637-2 (2004) Road vehicles — electrical disturbance from conducting and coupling — Part 2: Electrical transient conduction along supply lines only
43 ISO 7637-3 (1995) with correction 1 (1995) Road vehicles — Electrical disturbance by conducting and coupling — Part 3: Passenger cars and light commercial vehicles with nominal 12 V supply voltage and commercial vehicles with 24 V supply voltage — Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines.
1 2 OIML 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 IEC/TR 61000-2-1 (1990-05) 25 26 27 28 29 31 32 33 34 35 36 37 38 39 40 ISO 16750-2:2003 41 ISO 7637-1 (2002) 42 ISO 7637-2 (2004) 43 ISO 7637-3 (1995)
